CME Pyroshield Sdn Bhd (CMEP) - The fire detection and suppression specialist.  The company is 100% owned by CME Group Berhad, a comprehensive solutions provider to the fire-fighting and fire safety industry.

Fire is serious business, and here at CMEP, your fire safety needs are our priority. Whether it be for general building fire alarm systems, protection of more critical facilities requiring automatic fire suppression systems, or for protection of plants & processes, our dedicated team of fire industry engineering professionals are on hand to assist with consultancy, design, commissioning and service related to our range of fire safety solutions. 

CME Pyroshield Sdn Bhd is the ASIA Region licensee for the “Pyroshield®” Inert Gas Fire Suppression System listed under NFPA 2001 as IG-55 Clean Agent.  CMEP is also a specialist systems vendor for "Cirrus Pro" Early-Warning “HSSD” Fire Detectors and Addressable Systems from Protec UK.  In addition to the local Malaysian Fire Authority (BOMBA) approval, our products carry accreditations from established international certification organisations such as LPCB (UK), UL/FM, Bureau Veritas (France) and VdS (Germany).

Already, CME Pyroshield Sdn Bhd is establishing itself in Vietnam, Thailand, Indonesia & South Korea and is committed to bringing to market in the other countries in the ASIA Region environmentally sustainable fire safety systems that are safe, both for personnel and the environment.  Pyroshield® IG-55 fire suppression systems have the lowest cost of ownership when the initial system cost and its low refill cost is considered together, compared with any other fire suppression solutions currently available in the market today.

Inert Gas Fire
Suppression System

Pyroshield® inert gas fire suppression system uses IG-55, an inert gas blend classified as an NFPA2001 Clean Agent, safe for sensitive electronics, human occupied spaces and the environment.
The Pyroshield® system is particularly useful for suppressing fires in hazards where an electrically non-conductive medium is essential or desirable, where clean up of other agents present a problem, or where the space is normally occupied and requires a non-toxic agent.

The Pyroshield® system is particularly useful for suppressing fires in hazards where an electrically non-conductive medium is essential or desirable, where clean up of other agents present a problem, or where the hazard is normally occupied and requires a non-toxic agent.

The following are typical hazards protected by Pyroshield® systems:

  • Computer rooms
  • Sub-floors
  • Tape Storage
  • Telecommunications Exchange
  • Electrical Switchgear Room
  • Vault
  • Process Equipment
  • Genset Room

All normally occupied or unoccupied areas containing vital systems that support critical operations or high valued assets

Intelligent Fire Detection
& Alarm Panels

Protec's range of UK-made EN54 addressable fire alarm systems with industry-leading features have been designed not only for ease of use for end-users, but also with project implementors and maintenance personnel in mind. Typical application environments include commercial/industrial building, apartments, hospitals, airports, stadiums, power plants, etc.

Protec's (UK) range of EN54 addressable fire alarm systems with industry-leading features and design makes it a versatile system, equally adept and suited for detection and alarm of single small buildings as for integration of sprawling multi-building complexes within disparate geographical areas, to industrial plants and campuses. Protec's distributed processing architecture ensures that any isolated incident cannot render the entire system inoperative.

The Protec Algo-Tec™ 6000 protocol utilised by the Protec Algo-Tec™ 6300 and 6400 interactive digital addressable fire control systems accord a level of immunity to false alarms, more responsive fire detection, and ease of use, has all been achieved to develop one of the most reliable systems available.

Among the innovative features found in Protec interactive digital addressable fire control systems are:
* RVAV - allows visual address verification of devices via walkthrough RVAV mode

* Plug & Play - Protec's solution to ensure installed fire system could be completed and commissioned even if drop-down ceiling is incomplete. For industrial environments, the factory terminated plug-in connectors ensure a consistent and quality termination of wiring to devices.

* Loop powered sounders and displays

* Copper or fiber connectivity

* TCP/IP network capability

Early Warning
Fire Detection

Cirrus Pro range of cloud chamber based, early warning fire detectors are designed to detect fire in its earliest stages, often before visible smoke is produced. Earlier warning of impending fire together with timely intervention substantially increases the odds of bringing the fire under control quicker or even eliminating it altogether, and may help minimise potential downtime and collateral damage due to fire.

Cirrus Pro Aspirating Detector (ASD)

What is an Aspirating Detector?
Generally, aspirating detectors make use of a network of air sampling points and pipework  to deliver air, drawn from the environment being monitored back to the detector. This stream of sampled air is then analysed for evidence of any potential fire condition occurring within those spaces. Aspirating detectors are recognised as being typically hundreds of times more sensitive than optical smoke detectors and have been developed, for use where earlier warning of fire are required than can be provided by other smoke detection technologies, or simply, where use of other smoke detection technologies may be ineffectual for the environment under consideration.

Why Cirrus Pro?
Cirrus Pro stands apart as being the only aspirating detector in the market with natural immunity to false alarm from dust or other manufacturing processes. This is imbued by its unique CCD technology, which employs a technique used in particle physics to produce what is essentially a measureable cloud from thermal decomposition byproducts generated by overheated material.

Cirrus Pro is designed to pick up thermal particulates, the signature left by thermal decomposition of materials, from the sampled air. This allows Cirrus Pro to raise an alert or alarm at the earliest possible stage of an impending fire, usually way before any visible smoke is produced by the same event.

Since direct and collateral damage due to fire increases exponentially with time, any sound fire protection strategy need to take the time dimension into consideration. Cirrus Pro is an exciting product with the potential ability to stretch the time available to respond and act on fire. Want more time? Get more time with Cirrus Pro!

Vistage Malaysia Business coaching
Go to top